Autoslew seems not to report side of pier from the telescope

[MichiP]

Hi,

Does somebody know how to check if Autoslew reports the side of the pier from the telescope to Ascom?
We have the dome control from Astrometric, and their software gets the data from Autoslew. Normally, we use the same side of the pier, so it's not a problem to have the shutter perfectly aligned with the telescope. However, when the DDM changes the pier side, the dome does not get this information. 

Any ideas on how to check this? 

best
Michael 

[photon]

Servus 🙂

 

you can see the Side of Pier reported by the ASCOM driver i.e. in NINA.

[MichiP]

Hi

hmm.. then it must be a problem with my dome. Because the dome is not moving when the mount changes it's side.